WWW.HHELECTRONICS.COM
2
BASIC SETUP
HH VRE cabs can be mounted on the floor, or a suitable pole or
tripod. Don't over-extend poles/tripods; ensure at least 4 x the pole
diameter is still inside the outer pole. Make sure the legs have a good
splay on tripods, but do not obstruct doorways or other access-ways.
With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc. BEFORE turning on
your power amplifier. Many products have large transient surges at turn on and off which can cause damage to your speakers.
4)
Unpacking:
Please retain the packing carton and liners in case the unit should need to be returned at any time.
9) Servicing:
The user should not attempt to service these products. Refer all servicing to qualified service personnel.
3) Comply with warnings:
All warnings and instructions for these products should be adhered to.
6)
Cables
- never use a shielded or microphone cable for any speaker connections as this will not be substantial enough to handle the
amplifier load and could cause damage to your complete system.
1) Read Instructions
carefully before installing or operating this product.
Similarly, when turning off your system always turn down the level controls on your power amplifier and then turn off its power
before turning off other equipment.
Wait until all system parts have stabilised. This can usually take a couple of seconds.
2) Retain these instructions
In order to take full advantage of it and enjoy long and trouble-free performance, please read this owner's manual carefully, and
keep it in a safe place for future reference.
The Vector series are professional specification cabinets designed to give exceptional dynamics, clarity and projection in all
applications such as a portable PA.
5) Amplifier connection
. In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off your
sound system.
Thank you for purchasing a HH Vector Passive Full Range Enclosure.
By turning on your power amplifier LAST and making sure its level control are set to minimum any transients from other equipment
will not reach your loudspeakers.
7) Caution:
These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with
placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage.
(Stand not included)
35mm pole socket
