TENSOR SERIES ACTIVE SUBWOOFER
Designed and Engineered in the UK by HH Electronics LTD.
© 2020 HH Electronics Ltd
REAR PANEL CONTINUED
MODEL: TRS-1500
15. MAINS SWITCH:
Turns the system on and off. Ensure the
Volume controls
minimum before powering up the unit.
is set to
See below for more information.
11. AIR VENTS:
These are critical for the longevity and reliability
of the amplifier - DO NOT BLOCK.
13. INFORMATION:
Safety details.
Damage could occur if the voltage is incorrectly set.
14. VOLTAGE SELECT SWITCH:
Please check the voltage
setting to your region before powering up for the first time.
12. MAINS INLET SOCKET AND FUSE:
IEC input for
connection of an appropriate mains lead. Only replace the fuse
with the type indicated on the rear panel.
16. POLE MOUNT:
Both the TRS-1500 and TRS-1800 are
equipped with 35mm pole socket.
17. ILLUMINATED HH LOGO.
SWITCH OFF AND DISCONNECT THE POWER CORD BEFORE PROCEEDING.
1.
Slide out the fuse holder tray.
2.
Only replace fuse with the same
type and power rating as specified
on the rear panel.
FUSE REPLACEMENT
FUSE REPLACEMENT AND VOLTAGE SELECTION
VOLTAGE SELECTION
110-120V SETTING
220-240V SETTING
Using a suitable tool, slide the voltage
selector switch to the required
operating voltage.
POWER
11
11
12
13
13
14
15
4
16
17
POWER
CLIP
