WWW.HHELECTRONICS.COM
STACKING
1
Remove the 2x M10 x 35mm travel bolts and store for future use.
1
1
2
Insert suitable M10 eye bolts (see previous page for details) and strap cabinets together using suitable straps.
Note that eye bolts for flying systems must be cast,
shouldered fittings rated for the purpose.
Forged steel eye bolts of the type typically available
from DIY suppliers are NOT suitable and should
not be used under any circumstances.
Do not fly multiple cabinets together, each must be
flown on their own.
All suspension cables, shackles and other mounting
hardware must be properly secured to the eye
bolts and be capable of exceeding max load.
30mm min thread length
The top M20 pole mount can be used with standard M20 to 35mm distance poles to support top cabinets.
Ÿ
Don't overextend poles/tripods ; ensure at least 4 x the pole diameter is still inside the outer pole.
All speakers should be balanced and steady. If products are stacked, strap them together to improve stability. The fitted side tie down points can
be used to improve safety in this instance.
Ÿ
Ensure the top cab is smaller/lighter than bottom if using a pole.
14