HG2LIGHTING.COM/SUPPORT
© 2019 Copyright HG2 Emergency Lighting. All Rights Reserved. • PATENT PENDING • Patents #
INSTALL GUIDE
V071619
5
Use the other 4 self-tapping #8 screws to finish
securing the rear runner. Screw in the left side
of the runner, then the right side. Center the
two remaining screws between the left side and
middle, and the middle and right side.
Step 4:
WIRING
Chassis Ground
HG2 Runner
HG2 Runner
To (+) 12 Volt Power Source
(Existing Switiching Module)
Rear Bumper/Tailgate Runner
(optional)
Pattern Selector Button
Power
Indicator
Black
White
Red
Black
White
Red
Black
Red
7A Fuse
• Drill
• 9/32” Drill Bit
• Wire Strippers
• Soldering Iron/Solder
• Heat Shrink Tubing
• Wire/Cable Ties
Additional tools may be required to
complete installation.
Required Tools
1 — RPM12 Runner Platform Module
1 — Pattern Selector Button
1 — 10A Fuse
1 — Installation Guide & Warranty
Packet
Parts List
