HeyCafe HC-598, Manual

Page: 12 / 16

12
© HeyCafé Co., Ltd.
Version 5.0, June 2017

Do not use sharp objects to scrape coffee residue off of the grindstones.

Examine both of the grindstones’ condition and replace them if necessary.

The replacement and assembly of a new set of grindstones is a delicate task.
Only skilled technical personnel should be allowed to perform grindstone removal and assembly.
After all cleaning and replacing tasks are through make sure to assemble all of the parts and safety screws the
same way as they were disconnected. If anything does not fit back together or there are some leftover parts, do
not attempt to operate the appliance, call for the assistance of your technician.
Cleaning the dispenser

If a more thorough clean is required, then the operation must be performed by skilled technician.

After dispenser is thoroughly cleaned and empty secure the powder outlet guard back to its original position
by sliding it back until the snap clicks are heard.
To ensure long lasting grinder and great fresh taste of coffee, the cleaning procedure
as described above should be repeated routinely and at least once per month or as necessary
according the grinder’s usage and quality of beans.
END
STEP1
Discharge all grinded
coffee out of the
dispenser into a dry
container by operating
the discharge handle.
STEP2
Release the powder
outlet guard by pulling it
upward. The outlet
guard is fixed by 2 rails
and 2 snaps.
STEP3
Use a clean brush to clean the coffee powder outlet,
automatic switch housing, Brush the dosing chambers
one by one while rotating the dispenser with the
discharge handle. Use a dry cloth to remove oil stains and
other marks from dispenser’s clear window.