Hexbug VEX IQ, User Manual

Page: 100 / 120

100
Control System Guide
Start Screen and List of Programs
Programs
The
Programs Screen
of the Robot Brain is the first screen displayed after turning on the
Robot Brain, and will contain a list of all programs that have been downloaded to it. The
default program is Driver Control , which allows you to use and control up to eight Smart
Motors and four Sensors.
If additional programs have been downloaded to the Robot Brain, use the Up/Down arrows
to navigate between programs. The currently selected program will be highlighted; to run the
selected program, press the Check button.
Run or Configure Driver Control
Programs › Driver Control
The Driver Control program is unique in that it contains the ability to customize the way it
runs. This program is the default program loaded onto the Robot Brain.
When selecting the
Driver Control
program from the
Programs Screen
, two additional
options are presented: Run or Configure . Use the Up/Down buttons to select the Run option,
and press the Check button to begin running this program with the default settings.
Use Up/Down arrows to highlight Driver Control , then press the Check button.
Use Up/Down arrows to highlight Run , then press the Check button.
Run
Configure
Select Exit
Driver Control
Driver Control
Select Settings
Programs
Autopilot