LD900 Installation
LD900 Installation and Oper ations M anual
18
3 LD900 Installation
This section provides guidance on the installation of the LD900 receiver. In the event of difficulty, contact your
supplier or VERIPOS (
).
CAUTION
The personnel responsible for installing the LD900 system must be properly trained and competent to
install electronic equipment.
WARNING
No user-accessible parts. Disconnect the GNSS antenna(s) prior to servicing the LD900. Only trained
personnel are permitted to install/service the LD900 and antennas.
3.1 Schematic Examples
The schematics shown below represent three examples of antenna setup arrangement. Please be aware that
other antenna configurations are possible. For long-term installations, always contact VERIPOS to obtain setup
drawings specific to your installation, as these may differ from the examples below:
3.1.1 L-band Demodulator Installation (LD900L Model)
