Figure 33 Port side LEDs on the 1606 Extension SAN Switch
9. Port 0 status LED
1. System status LED
10. Port 4 status LED
2. System power LED
11. Port 8 status LED
3. Console port
12. GbE copper port
4. Ethernet link LED
13. GbE port 0 Fault (FLT) LED
5. Ethernet status LED
14. GbE port 0 status/activity LED
6. Ethernet port
15. GbE optical port
7. IP Address pull-out tab
16. GbE dual-color optical port LED
8. USB port
describes the port side LEDs and the recommended actions.
Table 13 1606 Extension SAN Switch port side LED patterns
Recommended action
Status of hardware
LED color
LED name
Verify the following:
System is off or there is an
internal power supply failure.
No light
Power status
•
System is powered on (power
supply switches are set to
1
).
•
The power cables are attached.
•
The power source is live.
If the system power LED is not green,
the unit may be faulty. Contact your
switch service provider.
No action required.
System is on and power supplies
are functioning properly.
Steady green
Port side LED activity for the 1606 Extension SAN Switch
61