Hewlett Packard Enterprise StorageWorks 1606 Extension Power Pack+ SAN Switch, Reference Manual, Page: 19 / 101

•
FICON CUP
•
FICON Accelerator
For information on these features, see the Fabric OS Administrator’s Guide .
Port side of the 1606 Extension SAN Switch
Figure 9 (page 19) shows the components on the port side of the 1606 Extension SAN Switch.
Figure 9 Port side of the HPE 1606 Extension SAN Switch
6. Fibre Channel ports (16) 1. System power LED
7. GbE ports: copper RJ45(2) 2. System status LED
8. GbE ports: optical SFP (6) 3. Console port (RJ45)
9. Serial number pull-out tab 4. Ethernet management port
5. USB port
The Fibre Channel ports are numbered from left to right on the faceplate, as shown in
Figure 10 (page 19) .
Figure 10 Port numbering on the 1606 Extension SAN Switch
3. GbE ports: ge0-ge1 (copper only) 1. Fibre Channel ports 0–3
4. GbE ports: ge0–ge5 (SFP) 2. Fibre Channel ports 4–15
A fully licensed 1606 Extension SAN Switch can have two trunking groups. Group 1 consists of
Fibre Channel ports 0–7, and group 2 consists of Fibre Channel ports 8–15.
Nonport side of the 1606 Extension SAN Switch
Figure 11 (page 20) shows the nonport side of the 1606 Extension SAN Switch, which contains
the combined power supplies and fans.
1606 Extension SAN Switch features 19