Port side of the FCoE Converged Network Switch
shows the port side of the FCoE Converged Network Switch.
Figure 7 Port side of the FCoE Converged Network Switch
6. 10-GbE ports 0–7
1. Switch ID pull-out tab
7. 10-GbE ports 8–15
2. System status (top) and power (bottom) LEDs
8. 10-GbE ports 16–23
3. Serial console port
9. FC ports 0–7
4. Management Ethernet port
5. USB port
Nonport side of the FCoE Converged Network Switch
shows the nonport side of the FCoE Converged Network Switch.
Figure 8 Nonport side of the FCoE Converged Network Switch
4. Fan assembly #1
1. Power supply #2
5. Power supply #1
2. Fan assembly #3
3. Fan assembly #2
1606 Extension SAN Switch features
A fully licensed 1606 Extension SAN Switch has the following features:
•
FCIP capability
Includes up to eight FCIP tunnels.
◦
◦
Each FCIP tunnel is represented and managed as a VE_Port.
◦
Fibre Channel Routing Services can be used over the FCIP link.
◦
Fabrics connected through FCIP merge if the ports are configured as VE_Ports, and
do not merge if one end of the connection is configured as a VEx_Port. If VE_Ports are
used in a Fibre Channel Routing Services backbone fabric configuration, then the
backbone fabric merges but the EX_Ports attached to edge fabrics do not merge. For
more information, see the
Fabric OS Administrator’s Guide
.
•
FCIP Trunking with load balancing and network-based failure recovery
16
HPE StorageWorks 8-Gb SAN Switches