Configuring Pre-Boot Network Settings
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Network Options
>
Pre-Boot Network Settings
.
2.
Select any of the
options.
3.
Select additional settings or enter additional values for that option.
4.
Save your changes.
iSCSI Boot Configuration
NOTE:
You can also configure iSCSI Boot settings using the RESTful Interface Tool. See the RESTful
Interface Tool documentation at:
http://www.hpe.com/info/restfulinterface/docs
iSCSI Initiator Name
Use this option to set a name for the iSCSI initiator using iSCSI Qualified Name (IQN) format. EUI format
is not supported. This option overrides the default name set for the initiator.
Adding an iSCSI initiator name
Use the iSCSI Initiator Name option to set a name for the iSCSI initiator using iSCSI Qualified Name
(IQN) format. EUI format is not supported. This option replaces the default name set for the initiator.
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Network Options
>
iSCSI Boot Configuration
>
iSCSI Initiator Name
.
2.
Enter a unique name for the iSCSI initiator using iSCSI Qualified Name (IQN) format. For example:
iqn.2001–04.com.example:uefi-13021088
.
This setting is saved automatically.
Add an iSCSI Boot Attempt
Use this option to configure an iSCSI boot target.
Adding an iSCSI boot attempt
Procedure
1.
From the
System Utilities
screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Network Options
>
iSCSI Boot Configuration
>
Add an iSCSI Boot Attempt
.
A message appears stating that this boot attempt will not be in effect until the next server reboot.
2.
Press
Enter
.
3.
Select a port on which to attempt iSCSI connection.
4.
Complete the configuration settings.
56
Configuring Network Options
