Hewlett Packard Enterprise HPE XP7, User Manual, Page: 192 / 311

For more information about checking alerts for SIM reference codes, see the HPE XP7 Remote Web
Console User Guide .
More information
Automatic completion of SIMs on page 192
Manually completing SIMs on page 192
Completing SIMs
Completing SIMs means changing the SIM status to "Completed". When the cause of a SIM occurrence
is solved, change the SIM status to Completed. If you complete a SIM without solving the cause, the SIM
might occur again when another operation is performed.
Automatic completion of SIMs
• For reference code 620 xxx The usage level of THP pool number xxx falls below the warning threshold.
For more information about setting the data pool’s warning threshold, see Creating Fast Snap data
pools on page 89.
• For reference code 625000The usage level of each THP pool in all of the pools in the storage system
falls below the depletion threshold.
• For reference code 626 xxx The usage level of each THP pool number xxx falls below the depletion
threshold.
NOTE: The data pool’s depletion threshold is not a value you can set using Fast Snap.
SIM reference codes 620 xxx , 625000, and 626 xxx are automatically completed if you increase the pool
capacity by adding pool-VOLs. Increasing the pool capacity removes the condition that causes these
SIMs.
Manually completing SIMs
For more information about completing SIMs automatically and manually, see the HPE XP7 Remote Web
Console User Guide .
Procedure
1. In the Explorer pane, click Storage Systems , expand the storage system tree, and then click Pools .
2. In the Pools window, click More Actions > Complete SIMs .
192 Completing SIMs