Removing and replacing an LFF drive blank
Procedure
on page 33.
2.
Remove the drive blank.
3.
To replace the blank, slide the blank into the bay until it locks into place.
Removing and replacing an SFF drive blank
Procedure
on page 33.
2.
Remove the drive blank.
3.
To replace the blank, slide the blank into the bay until it locks into place.
Removing and replacing drives
Removing and replacing the hot-plug drive
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all
bays are populated with either a component or a blank.
Removal and replacement procedures
43
