To replace the component, reverse the removal procedure.
DIMM-processor compatibility
The installed processor determines the type of DIMM that is supported in the server:
AMD EPYC processors support DDR4-3200 DIMMS.
Mixing DIMM types is not supported. Install only the supported DDR4-3200 DIMMs in the server.
Removing and replacing a DIMM
To identify the DIMMs installed in the server, see
Procedure
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
•
Extend the server from the rack.
•
Remove the server from the rack.
5. Do one of the following:
•
•
Remove the 4 LFF midplane cage.
6. Remove the DIMM.
Removal and replacement procedures
86
