1
Preparing for installation
The HPE MSR958 Router Series includes the models in
.
Table 1
HPE MSR958 Router Series models
Product code
HPE description
RMN
JH300A
HPE MSR958 1GbE and Combo Router
BJNGA-BB0040
JH301A
H PE MSR958 1GbE and Combo PoE Router
BJNGA-BB0041
IMPORTANT:
For regulatory identification purposes, every MSR958 router is assigned a regulatory model
number (RMN). These regulatory model numbers should not be confused with the marketing
name HPE MSR958 or the product codes.
Safety recommendations
To avoid any equipment damage or bodily injury, read the following safety recommendations before
installation. Note that the recommendations do not cover every possible hazardous condition.
Safety symbols
When reading this document, note the following symbols:
WARNING
means an alert that calls attention to important information that if not understood or
followed can result in personal injury.
CAUTION
means an alert that calls attention to important information that if not understood or
followed can result in data loss, data corruption, or damage to hardware or software.
General safety recommendations
•
Keep the router and installation tools away from walk areas.
•
Place the router in a dry and flat location and make sure anti-slip measures are in place.
•
Remove all external interface cables and power cords before moving the router.
Electricity safety
•
Locate the external power switch in the room before installation. Shut off the power
immediately if an accident occurs.
•
Make sure the router is reliably grounded.
•
Do not remove and install the chassis cover when the router is operating.
•
Connect the interface cables correctly.
•
Use an uninterrupted power supply (UPS).
•
Do not work alone when the router has power
•
Always make sure the power has been disconnected during installation or replacement.