Hewlett Packard Enterprise Brocade 32Gb/12 2SFP+, User Manual

Page: 38 / 47

Dimension Measurement
Depth 1.082 in (27.48 mm)
Weight 2.99 kg (6.6 lbs)
Environmental requirements
To ensure proper operation, the switch must not be subjected to environmental conditions beyond those
for which it was tested. The ranges specified in
Table 11: Environmental requirements on page 38 list
the acceptable environment for both operating and non-operating conditions.
Table 11: Environmental requirements
Condition Acceptable range during
operation Acceptable range during non-
operation
Ambient
temperature Inlet air temperature up to 43°C
(109.4°F) at sea level with an
altitude derating of 1.0°C per every
1000 ft of elevation above sea level
to a maximum operating altitude.
For example, the maximum inlet air
temperature requirement at 5000 ft
above sea level is 38ºC. Non-operating -40°C to 70°C
(-40° to 158°F). Maximum rate of
change is 20°C/Hr (36°F/Hr).
Humidity 5 to 95% relative humidity, 38.7°C
maximum wet bulb temperature,
and non-condensing 5% to 95% relative humidity,
38.7°C maximum wet bulb
temperature, and non-condensing
Altitude 0 to 10,000 ft (3 km) above sea
level 0 to 30,000 ft (9144 m) above sea
level
Shock 40 G, 2ms duration half-sine-wave shock—140 G,
2ms
square-wave shock—up to 80 G,
180 inches/s
Vibration 0.002 G2/Hz, 10–500 Hz 0.008 G2/Hz, 10–500 Hz
Supported SFPs
Do not use unsupported SFPs. They may not fit correctly and may void your warranty. Any port with an
unsupported SFP will automatically be disabled by switch firmware, leaving the port non-operational. For
a list of supported SFPs, see
Supported SFP transceiver options on page 9.
For a complete list of supported devices, see the latest version of the HPE SAN Design Reference Guide
at the website: http://www.hpe.com/support/SAN/docs .
Supported HBAs
For a list of HBAs that have been tested and are known to work with the SAN switches, see the latest
version of the
HPE SAN Design Reference Guide at the website: http://www.hpe.com/support/SAN/
docs .
38 SAN Switch technical specifications