MF877-00 Page 2
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
Item Description
Notes
Quantity
of items
included
in product
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Tamper Resistant Torx screwdriver
T30
Description #2 Tamper Resistant Torx screwdriver
T25
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
AP565:
1. Remove accessories.
2. Remove two M6 screws by using T30 Tamper Resistant Torx screwdriver from holder, then disassemble the holder.
3. Remove four M5 screws by using T25 Tamper Resistant Torx screwdriver, then take out the Radome (include gasket).
4. Remove two antenna cables from PCBA by hand, then disassemble antennas from radome.
5. Remove five M3 screws by using Phillips screwdriver, then take out the PCBA.
AP567:
1. Remove accessories.
2. Remove two M6 screws by using T30 Tamper Resistant Torx screwdriver from holder, then disassemble the holder.
3. Remove four M5 screws by using T25 Tamper Resistant Torx screwdriver, then take out the Radome (include gasket).
4. Remove three antenna cables from PCBA and four M3 screws by using Phillips screwdriver, then take out the antenna
plate.
5. Remove five M3 screws by using Phillips screwdriver, then take out the PCBA.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
