Aruba IAP-3XX Wireless Access Points with Aruba Instant Firmware FIPS 140-2 Level 2 Security Policy |23
Figure 17 - Aruba IAP-330 Series Access Point – Interfaces
DC power interface:
48V DC (nominal, +/- 5%)
1.35mm/3.5-mm center-positive circular plug with 9.5-mm length
Antenna interfaces:
• 802.11a/b/g/n/ac four external antenna (IAP-334) or twelve internal antenna (IAP-335)
USB 2.0 host interface (Type A connector)
Bluetooth Low Energy (BLE) radio:
Bluetooth: up to 4dBm transmit power (class 2) and -91dBm receive sensitivity
Other Interfaces:
Visual indicators (two multi-color LEDs): for System and Radio status
Reset button: factory reset (during device power up)
Serial console interface (standard RJ-45 female connector; disabled in FIPS mode by TEL)
Table 6 -
I
AP-330 Series Status Indicator LEDs
LED Type
Color/State
Meaning
System Status (Left)
Off
AP powered off
Green/Amber
Alternating
Device booting; not ready
Green - Solid
Device ready
Amber - Solid
Device ready; power-save mode (802.3af PoE):
* Single radio
* USB disabled
Green or Amber
Flashing
Device ready, restricted mode:
*
Uplink negotiated in sub optimal speed; or
*
Radio in non-high throughput (HT) mode
Red
System error condition
Radio Status (Right)
Off
AP powered off, or both radios disabled
Green - Solid
Both radios enabled in access mode
Amber - Solid
Both radios enabled in monitor mode
Green/Amber
Alternating
Green: one radio enabled in access mode,
Amber: one radio enabled in monitor mode
