-
6
-
Both
HEAT &
COOL
temperature set
points &
RETURN
&
LEAVE
times
have to be set for each day
.
T
his can be done for each day
individually or in a block of days by
selecting more than one day for
programming.
1.) Select HEAT in the SYSTEM
button window,
2.) Select the group of days that require
the same RETURN time & HEAT set
point.
3.) Press the RETURN button and
the existing start time and set point
will appear, alter temp & time as
required. 4.) Press the LEAVE button
and adjust finish time as required.
5.) In the SYSTEM selection window
select COOL then repeat steps 2-4.
6.) Press the DONE button to exit
programing.
To view the schedule press the
VIEW SCHED button
And then select the day to be
viewed. Press the RETURN or LEAVE
buttons in either HEAT or COOL mode
to see the program schedule for that day.
