background image

20 

appendix a

The  Clean  Air  Act  1993  and  Smoke  Control 
Areas Under the Clean Air Act local authorities 
may declare the whole or part of the district of 
the authority to be a smoke control area. It is an 
offence to emit smoke from a chimney of a buil-
ding, from a furnace or from any fixed boiler if 
located in a designated smoke control area. It 
is also an offence to acquire an ”unauthorised 
fuel” for use within a smoke control area unless
it is used in an ”exempt” appliance (”exempted” 
from the controls which generally apply in the 
smoke control area).

The  Secretary  of  State  for  Environment,  Food 
and Rural Affairs has powers under the Act to 
authorise smokeless fuels or exempt applian-
ces for use in smoke control areas in England. 
In  Scotland  and  Wales  this  power  rests  with 
Ministers  in  the  devolved  administrations  for 
those countries. Separate legislation, the Clean 
Air  (Northern  Ireland)  Order  1981,  applies  in 
Northern  Ireland.  Therefore  it  is  a  requirement 

that  fuels  burnt  or  obtained  for  use  in  smoke 
control  areas  have  been  ”authorised”  in  Regu-
lations  and  that  appliances  used  to  burn  solid 
fuel in those areas (other than ”authorised” fuels) 
have been exempted by an Order made and sig-
ned by the Secretary of State or Minister in the
devolved administrations.

The  Scan-Line  800  series  have  been  recom-
mended  as  suitable  for  use  in  smoke  control 
areas when burning dry wood logs.

Further  information  on  the  requirements  of  the 
Clean Air Act can be found here: 
http://smokecontrol.defra.gov.uk/

Your local authority is responsible for implemen-
ting the Clean Air Act 1993 including designation 
and supervision of smoke control areas and you 
can contact them for details of Clean Air Act re-
quirements.

Guarantee

Heta wood stoves, subjected to a strict quality 
control during production and before delivery to 
the dealer.

Therefore, the stoves guarantee is                              

FOR FIVE YEARS

Against defects in manufacturing

The guarantee does not cover:
Wearing parts / fragile parts such as:
- Vermiculite stones in the combustion 
  chamber, glass, seals and the casted bottom
  or shaking grate.

- Damage caused by improper use.
- Transportation costs for warranty repair.
- Assembly / disassembly of warranty repair.
Should you have cause to make a complaint,
please quote our invoice no.

Warning

Any  unauthorized  alterations  to  the 
stove  and  the  use  of  non-original 
parts will void the warranty.

 

Summary of Contents for SCAN-LINE 80





















Reviews: