18
1.2 Installing the ceramic panels
Remember that the ceramic panels can break!
They must be installed very carefully!
Lie the three panels for each side adjacent to
each other, or put in place without springs and
measure the height. Adjust for any difference
in relation to the stove by placing the spacers
provided on top of the side base plates (C).
1.2.1
1.2.2
1.2.3
1.1 Preparation
1.1.1
If the stove is connected using the top flue
pipe, metal grate B must be installed before
the flue pipe is connected.
1.1.1
1.1.2
1.1.2
Before the ceramic cladding is affixed, the
side base plates (C) must be screwed onto the
stove.
1.2.1
Insert the bottom right panel in behind the back
wall and rotate the front towards the stove.
1.2.2
Push the side panel forward behind the edge
of the plate. Insert a steel spring (D) between
the back wall and the side panel to hold the
side panel in place.
1.2.3
Install the five remaining side panels in the
correct order, as described in 1.2.1 and 1.2.2.
