Heta 5032-0061, Quick Manual

Page: 8 / 32

3.
Use the overview below to select the correct ”Level” for your stove and chimney.
4.
Go to Parameter Menu Level 4 to set the ”Level”.
L1 L2 L3 L4 L5
Chimney draught +20 Pa 16 Pa 12 Pa 8 Pa 12 Pa
SL 500 Serie x x x x
SL 800 Serie x x x x
Sidewindow SL 800 x
(The standard setting on HAC is L5 )
Heta recommends establishing a chimney draught of approx. 12 Pa, as this will help you make
the most of your wood-burning stove. If you are uncertain of the strength of the draught in
your chimney, ask your local dealer or chimney sweep to measure it.
(If you select a different Level, the HAC unit will restart and return to the ‘Overview menu’).
Press the ‘Select / Change’ button until the Parameter Menu is displayed. Then
press ‘OK’ and the number 0 will flash in the display. Press ‘+’ until the number 4
appears, flashing. Press ‘OK’ to confirm. Press the ‘Select / Change’ button once
and ‘Product no.’ will appear in the display.
Press the ‘OK’ button and ‘Version L5’ will start to flash. Then use the ‘+’ or ‘-’ but-
ton to select the appropriate Level. Press ‘OK’ to confirm
( The HAC unit will then restart at the ”Level” selected)
After you have entered these settings,
the HAC unit is ready for use.
8