W6100 Manual Online 04/08/22 Hessaire.com
1
2
3
4
5
6
7
Window Evaporative
Cooler
Use & Care Guide
Model: W6100
6700 CFM
INDEX
Safety Rules/Getting Started....
Installation
………...…………….
Operation/Controls/Specs
……..
Dimensions/Maintenance
….…..
Troubleshooting
…………………
Parts Illustration
…………………
Warranty
………..……………….
General Safety Precautions
Use only with a 115v, 60Hz, Single Phase grounded circuit.
Always unplug the unit and switch to off position when servicing.
Use qualified electricians when replacing electrical components.
Do not operate with rear media panel or front guard/louvers removed.
Do not operate with damaged power cords, outlets or other visible damage.
Do not route the power cord under carpet or other flooring.
Do not use with plug adapters or 2 prong connectors.
WARNING: Read and follow all instructions, cautions and warnings.
Failure to do so could result in personal injury, death or property
damage and could void the warranty.
EN1
Getting Started
To reduce risk of electrical shock or fire, DO NOT use with any solid state
speed control device.
Contents: (1) cooler unit, (1) hardware pack, (1) manual
Suggested Tools/Materials Needed:
•
Drill
•
Adjustable Wrench
•
Drill Bits For Mounting Screws
•
#2 Phillips Screwdriver
•
Caulking/Sealant
•
1/4” Plastic Drain Tubing
•
Support Brackets
•
Spacer material: wood strips
1.
Extend out and fasten in place.
Collapsed
For Shipping
Protection
2.
Remove back panel.
3.
Remove & discard
cardboard protectors.
Fasten with 12
screws (provided)
Unpacking:
Carefully unpack and inspect the entire unit prior to installing. Ensure there is no
visible damage and all contents are included.
Note: The fan assembly portion that protrudes into living area is recessed for shipping
purposes.
1.
Pull fan assembly outward (approx. 9”) and fasten in place with the
12
provided screws.
2.
Remove back panel(
see page 4
).
3.
Remove and discard both
side cardboard pad protectors (cardboard pieces protect media pads while extending).
