20
HE 5750 Operating Instructions
#371627 Version 1.1
6 Installation and housing
The device must be assembled in a way that it is protected against humidity and
contamination. The permissible ambient temperature (50°C) must not be exceeded.
The electrical connections must be performed according to the relevant VDE or local
regulations. The connection of the device must always take place in voltage-free condition.
Contactors in the control cabinet must be suppressed with RC networks.
The device has got a network filter. In case of transient interference voltages, an additional
external line filter may be required. The line filter is not included in the standard delivery, but
can be ordered from HESCH Industrie-Elektronik GmbH.
6.1 Power supply
The controller requires 24 V DC. The power consumption is approx. 0.5 A.
Attention!
Before switching the device on, check for correct voltage level. In case of
a faulty connection, the device may be severely damaged.
6.2 Device dimensions
HE 5750 rear view
Device dimensions
295 × 200 × 40 mm (W × H × D)
Control panel cut-out
265 × 170 mm
Bolt M5
