Chapter 2 Safety information
Device description HE 5697 MFC
11
Version 1.4
The following provisions must be observed:
Attach the cables to the connections and terminals correctly.
It is only permitted to clean the housing with wet cleaning agents in order to avoid static
charging.
It is required to clean the device in order to prevent increased dust formation.
Electrical connection!
Install the electrical lines in accordance with the respectively applicable local reg-
ulations (VDE 0100 in Germany). Lay the measuring lines separately from the
power lines. Produce a connection between the protective ground connection (in
the respective device carrier) and a protective ground.
Troubleshooting!
When beginning to troubleshoot, all possible sources of error regarding additional
equipment or cables (measuring lines, wiring, slave devices) should be taken into
consideration. If no error source can be found after examining these points, we
recommend to send the device to the supplier.
Decommissioning!
Disconnect the power supply entirely if the device is to be decommissioned. Se-
cure the device against inadvertent operation!
If the device is interconnected with other devices and/or equipment, the effects of
the deactivation should be considered prior to disconnecting the device and the
appropriate precautions should be taken beforehand.
