HESCH Industrie-Elektronik GmbH
10
HE 5409, version 1.4, # 341539
4.
Assembly
Please note!
Regarding a
drilling template
please refer to our website:
Please ensure during printing that the document is printed 1:1. Ensure
the dimensional accuracy of the printout prior to drilling.
The assembly of the measuring transducer HE 5409 should possibly not take place in the
vicinity of heat sources. The ambient temperature at the assembly site must not exceed the
permitted nominal temperature for operation mentioned in the "Technical Data" (page 14). It is
permitted to assemble the device in areas of explosion class EX ATEX zone 22 and 2. The
special regulations must be observed,
see chapter 2.4 device identification on page 7.
Dimensions
Illustration 2.
Reverse side of the housing
Scope of delivery
HE 5409
Operating instructions
Please note!
After receipt, check the delivery for completeness and visible defects.
Immediately inform your respective HESCH agent in case of a claim.
