Chapter 5 Electrical commissioning
15
Operating manual HE 5710 / HE 5711
Version 1.3
5
Electrical commissioning
Mind the following points prior to turning on the device:
Firmly connect the cables to the cable glands. The supply voltage must match the specifi-
cations on the type plate.
The device may only be operated in a closed state.
The temperature limitations specified for use of the device have to be observed before and
during operation.
The protective ground connection in the appropriate device carrier has to be conductively
connected to the protective ground.
5.1
Safety information
Danger of electric shock!
Only perform the electrical installation in a dead-voltage state.
Material damage due to electrostatic charging!
Observe the safety measures according to DIN EN 61340-51/-3 in order to pre-
vent electrostatic discharging!
Note!
Only qualified specialists may work on the electronics.
