CABLE MANAGEMENT
−
There are cable ports on both sides of the enclosure. Upon installing instrument,
decide which side of the enclosure the instrument cables should be ported
through. If necessary, remove port cover and place in port which will not be
used.
−
Remove damping foam from cable port to be used. Feed instrument cables out
through port.
−
Outside of enclosure, compress two pieces of damping foam around cables.
Push foam and cables into cable port (see picture above). Adjust as necessary to
ensure a good seal around the cables.
MAINTENANCE
−
The enclosure can be cleaned using general cleaning agents and a soft cloth. Do
not use abrasive cleaning materials as it may degrade the paint.
−
Keep enclosure door closed and latched when the enclosure is not in use to avoid
undue strain on hinges.
−
Contact Herzan for replacement parts.
Removable Port Cover
Cables Installed
Step 3 Detail
Removable Port
Cover Detail
