Page 7
HERZ Roomtemperature thermostat
Working mode definition
Following your installation (Unit installed), your thermostat will offer different possibilities. Following the model
of the receiver linked with your thermostat, you will have also different possibilities for the working and
regulation mode (i.e. Floor regulation, air regulation combined with floor limitation, Pilot wire function…)
.
•
Autonomous working
Your thermostat has several working modes to allow you, to adjust your unit according to your life habits.
•
Changing the working mode
Open the small center cover to have access to the navigation keys
(<)
or
(>).
You can now press these keys to display
the working mode line. Move the frame cursor on the desired working mode and press
(OK)
to enter in the operating
mode you have chosen.
Manual Mode - Comfort
Manual working mode, the comfort setting temperature will be followed all the time. By pressing
(-)
or
(+)
keys, the
comfort setting temperature starts to blink and can be adjusted.
Manual Mode - Eco
Manual working mode, the reduced setting temperature will be followed at all time. By pressing the
(-)
or
(+)
key, the reduced setting temperature starts to blink and can be adjusted.
OFF Mode
Use this mode, if you need to switch off your installation.
Be careful:
In this mode your installation can freeze.
At any time, when the display is off, press on the
(Ok)
key to display a few seconds the current temperature and time.
To restart your installation, use the navigation keys
(<)
or
(>)
.
Automatic mode
In this mode the thermostat will follow the chosen program (Built-in or customized) according to the current time,
the comfort and the reduced setting temperatures. You can easily override temporarily the current program by pressing
(-)
or
(+)
. The thermostat jumps to the timer mode in which you select a setpoint and a time. The thermostat returns
automatically to the automatic mode at the end of the time.
