Herutu TW-510T, Instruction Manual

Page: 8 / 32

2
2.Specifications
2.Specifications
Items Specification Remarks
Frequency
259.55MHz R2 *1
259.65MHz R4 *1
Intensity of
radio wave
Electric intensity at 3m distance is 500
μV/m or less
Weak radio wave
Modulation
method
Binary FSK by the direct modulation
Transmission
method
Unidirectional transmission
Transmit data
14-bit/1-frame
Approximate 7-9frame transmission
1-shot
Input
Limit SW×1 SS-01GL(Omron
）
Test SW×1
Communication
distance
Approximate 10m in radius *2
Guarantee of
working
temperature
0-50
℃
Power supply Coin battery CR2032(3V)
Battery life Approximate 250,000-shot
Measured at
interval of 1sec
1-shot time Approximate 300mS
Antenna Mounted in case
ID setting 8-bit Dip SW
Display Battery check display LED
External size 34×71×17.5mm See drawing.
Weight
40g
(Seat, Limit SW and battery are included
）
*1:Use either R2 or R4 frequency. (Stated on product number label
）
*2:It may sometime disable the communication at the place with a lot of radiation noise
emitted from an electrical welding equipment.
It is possible to interrupt communication at the dead point where a reflected
electric wave interferes. We recommend you to use Diversity type receiver
(TW-510RD) in such a case.