Herutu TW-510T, Instruction Manual

Page: 7 / 32

1
1.General descriptions
1.General descriptions
Thank you very much for purchasing the Wireless Equipment for Torque Wrench
Transmitter TW-
510T”.
This operation manual contains the instructions necessary for using the “TOBISHIME
Transmitter TW-
510T” (hereinafter specified as “TW-510T”). Thoroughly read through this
manual before use to correctly operate.
Once the TW-510T is mounted on the Torque wrench with Limit switch (LS), the
tightening completion signal of Torque wrench can be transmitted to each series of our
TW-510R.
This high capacity Radio Transmitter running through the weak radio wave of 260MHz
zone provides the noise-proof and reliable system.
1-1.Features
●
This machine is designed as the successor device to the TW-200T, intended
for miniaturizing the overall dimensions.
●
The Torque wrench with Limit Switch (LS) currently being used can be easily
remodeled into the wireless type.
●
This Transmitter consists of compact design using the coin battery type power
supply.
●
License and qualification for radio unwanted.
●
Noiseless weak radio wave of 260MHz-zone is used.
●
The antenna-built-in type is superior in handling (controllability).
●
The ABS resin case mounted enables the dust & oil mist proof.
●
The 8-bit code can be set so that multiple units can be used.