26
2-2-5 Setting the Tact
Set tact in seconds (time required for production per product).
(1) Press the [0] key. The resulting display is as follows:
(2) Input tact in seconds within 5 digits (9999.9).
<e.g.> To set 45.5 seconds, input [4][5][5].
(3) If you press the [ENT] key after this, the value you input will be set as the tact. If you
have inadvertently set a wrong data, press the [CLR] key and re-input the correct data.
Tact can be changed at any time (even during working).
If tact is 0, the Plan calculation will be stopped.
0
The command No. is displayed for about
0.75 seconds.
↓
*
*
*
*.
The currently set tact (integral part)
*
The currently set tact (decimal part)
4
5.
The value input (integral part)
5
The value input (decimal part)
