43
HMD8 DSP/
USER’S MANUAL
6.5.4
STATUS BAR
The status bar is located at the bottom of the configuration software and provides some useful information for the user.
In particular, some icons are shown on the right side of the status bar as in the following images:
The number next to each symbol indicates the amount of warnings or information.
By clicking on the symbols an alert list panel opens that allows you to view the attached messages. The image below shows
the alert list panel containing some sample messages.
3
1
2
Warning:
indicates the presence of potential configuration problems. This
type of warning occurs when, in the mixer, one or more inputs of a source are
not used, or an output channel does not receive any signal contribution.
Info:
provides useful information. These types of information occur when an
output channel receives a total contribution greater than 100% in the mixer,
or the delays of the output channels do not match the position of the speakers.
OK:
indicates that no potential configuration problems are detected.
1
2
3
WARNING:
all these messages are a reminder and can indicate a possible forgetfulness by the user. It is not necessary
to fix all the warnings and infos to save the configuration on the PC or finalize the connected device, as long as
the user is aware of it.
6
