Operating Instruction
95950004
29
EN
8. Mounting instructions
NOTE:
The battery charger is non-portable equipment.
To permanently mount the charger, use the following instructions:
8.1
Slide all 4 brackets (Item 1) into the
track on the back, from the right side, as
shown above. Make sure the set screws
(Item 2) are unscrewed enough so they
do not scratch the surface of the housing.
8.2
Lift the charger by its handle and set it
against your mounting location, tighten
the set screws (Item 4) to 66 in/lb (7.5 n/m)
of torque to secure the brackets (Item 1),
starting with the top two brackets first.
