English - 5
INGREDIENTS CHART
CUPS
2
4
6
8
LIQUID
Milk/Water
16oz.
32 oz.
48 oz.
60 oz.
POWDER MIX
with Milk
4 tbsp.
8 tbsp.
12 tbsp.
16 tbsp.
POWDER MIX
with Water
4 tbsp.
8 tbsp.
12 tbsp.
16 tbsp.
Note:
Different instant cocoa, coffee, and tea mixes may vary from the quantities shown in this
chart. Use the quantities specified on the packaging of the instant hot drink mix for exact
measurements, or adjust to taste. You can use the included
⅓ cup measuring scoop to
measure.
“PERFECT TEMPERATURE” FEATURE
The Hot Beverage Machine
is designed to maintain the “Perfect Temperature.”
Once
the beverage reaches the “Perfect Temperature,” the motor will stop running
and the mixing paddle will stop mixing, but the blue indicator light will still be lit. The
appliance is now idle but still on. As the beverage cools down, the appliance will
automatically
reheat and remix back to the “Perfect Temperature.” THE
APPLIANCE WILL CONTINUE TO CYCLE ON AND
OFF UNTIL THE “CANCEL”
BUTTON IS PRESSED. The control buttons can be pressed at any time to change
the mix settings.
A small amount of smoke and/or odor may occur upon heating due to the
release of manufacturing oils
– this is normal.
Some minor expansion/contraction sounds may occur during heating and
cooling
– this is normal.
C
LEANING
Y
OUR
HERSHEY’S
H
OT
B
EVERAGE
M
ACHINE
The Hot Beverage Machine should be cleaned after every use.
Note:
Do not wash
any parts in the dishwasher and do not immerse the motor base or mixing container
in water or any other liquid.
1. Unplug the appliance from the electrical outlet.
Allow the entire appliance to
cool before cleaning.
2. Remove the mixing container from the motor base.
3. Pour out any unused portion of the hot drink mixture.
4. Add hot water and a couple drops of dish soap to the mixing container. Wash and
rinse. Note: For any difficult to remove build-up, use a nylon scrub
pad.
To
remove build-up around the edge of the mixing container and under the gasket,
use the corner of a nylon scrub pad. It may help to let hot, soapy water sit inside
the mixing container for a few minutes.
Do not
immerse the mixing container in
water or any other liquid.
5. Separate the lid and measuring scoop, remove and disassemble the dispensing valve
as described below. Wash lid, measuring scoop, and dispensing valve pieces in hot,
soapy water. Rinse and dry pieces thoroughly before reassembling.
6. Wipe the exterior of the motor base and mixing container with a soft, damp cloth.
7. Periodically sanitize mixing container and gasket. Place mixing container on the
motor base and add 4 cups of water and ¼ tsp. unscented bleach to the mixing
container. Put lid with scoop on mixing container, and run the appliance through a
complete cycle on “HEAT & HI SPEED.” After cycle, empty mixing container
through the dispensing valve and let air dry.
Summary of Contents for L5768
Page 9: ...English 9 NOTES ...
