![Herrnhuter A1s Operating Instructions Download Page 2](http://html1.mh-extra.com/html/herrnhuter/a1s/a1s_operating-instructions_2126891002.webp)
1. The star chain may only be used for decoration.
It is not a toy. The stars have sharp points – handle them
with care to prevent injury.
2. The starchain is suitable for indoor- and outdoor use.
3. The chain works as a parallel circuit. The connector is
located just on one side.
4. Defect lamps has to be replaced. Ensure that you use ap
propriate lamps only - similar to the specification of the
originally provided lamps.
5. Please unplug the chain before replacing the lamps.
For replacement, loosen the star by a gentle rotation.
6. Make sure that each socket is provided with a lamp.
7. Always check if the lamps are fitted tightly and the
cable insulating covering is not damaged.
8. To avoid danger of electrical shock, never touch damaged
cables, open electrical wiring, broken fittings or lamps.
Unplug the chain immediately.
9. Do not use a damaged transformer or chain of lights.
10. Outdoor use is prohibited without a sealing ring in each
lamp socket.
Attention, electric device.
Do not operate without supervision!
1. YOUR PRODUCT
Size:
10 stars Ø 13 cm (5 inch)
Colours:
yellow, white, red, yellow/red, white/red,
green, blue
Material:
plastic (type A)
Model:
star chain A1s - for indoor and outdoor use
Operating instructions for A1s
star chain for indoor and outdoor use
1. Before attaching the stars, fasten the star chain at the in-
tended place with the use of the built-in clips. Please check
if the lamps and sockets are stable and fixed vertically.
4. OPERATING- & SAFETY INSTRUCTIONS
3. ASSEMBLY INSTRUCTIONS
2. Now put the stars onto the lamps with light rotation and
pressure and make sure that the stars are fixed firmly.
The lamp should always be placed in the middle of the stars.
3. Than connect the plug of the chain to the transformer
and plug it into the wall socket.
- 10 plastic stars, Ø ca. 13 cm (5inch)
- 1 star chain, 15 m long parallel connection,
provided with two wiring LIYZ 2*0,25 mm² and 10 sockets E10
10 LED DC 6V - 0,6 W (10x0,6 W), 2350K
ready to use, with integrated sealing rings,
distance: between lamps: 1 m, from socket to first lamp 5 m
- 1 transformer - IP 44, EU-plug
Input 100-240 V, 50-60 Hz
Output DC 6V - 1,2 A
≙
7,2 W
© Herrnhuter Sterne GmbH, Subject to change 11/2018
Herrnhuter Sterne GmbH
Oderwitzer Straße 8 . 02747 Herrnhut
Tel. +49-35873 3640 . Fax +49-35873 36435
2. CONTENT - STAR CHAIN A1S
IP 44