If proper adjustment cannot be obtained by
this method, visit your Authorised
Hero
MotoCorp
workshop.
NOTE
(A) Cut-out not seated
(
B
) Cut-out seated
3
4
4
3
î
Make sure that the cut-out on the adjusting
nut is seated on the brake joint pin (4) after
the final adjustment has been made.
î
Apply the brake several times and check for
free wheel rotation when released.
î
If adjustment is necessary, turn the rear
brake adjusting nut (3).
Adjustment
î
Measure the distance brake pedal (1) moves
before the brake starts to take hole. Free play
(2) should be 20-30 mm.
REAR BRAKE
î
Raise the rear wheel off the ground by
placing a block under the engine.
(1) Rear brake pedal (2) Free play 20-30 mm
A
B
(A)
Decrease free play (
CW
)
(
B
)
Increase
free play (
ACW
)
4
3
(3) Adjusting nut (4) Brake joint pin
BRAKE WEAR INDICATORS
When the brake is applied, an arrow (1), fixed
to the brake arm (2), moves towards a
reference mark (3) on the brake panel (4). If the
arrow aligns with the reference mark on full
application of the brake, the brake shoes must
be replaced.
Front Brake Wear Indication
34
If proper adjustment cannot be obtained by
this method, visit your Authorised
Hero
MotoCorp
workshop.
NOTE
CW- Clockwise, ACW- Anticlockwise
2
1
