16
Owner`s manual
4.6 Setup (change between km & miles).
Push
the knob button to enter the menu.
Turn the knob untill
setup
(6) appears. Now push the knob
for 2 seconds to enter the setup menu. You can now
change
between km and miles by pushing the knob
(7) again for
2 seconds. Please wait, the system confirms your selection
automatically.
You enter the
ts-value
screen (8) by turning the knob in the
setup menu. This submenu is for servicing and allows dealer
and service technicians to measure the correct function of your
torque-sensor. To exit the setup menu from here
turn the knob
untill it shows
back
(9) and confirm with a push to return to the
standard screen again (1).
4.7 Switching between Odo & Trip
Push
the knob button to enter the menu.
Turn the knob untill
odo or trip
(10/11) appears. Please wait,
the system confirms your selection automatically.
To reset trip: push the knob for two seconds once you are on
the trip screen (11).
If you leave your A2B inactive for 10 minutes, the system
will switch off (including lights) and will go into sleep-mode.
ts-value
8
back
9
odo
231
10
setup
6
km
7
miles
trip
0.0
11
trip
5.1
