Herni
IV. Using the optional accessories
4.2 clamp bow
Fitting advice:
1. Please ensure that your supplying dealer/fitter gives
you instruction in the use and adjustment of the seat.
2. Open the grub screws
(2 each side) and remove
the clamp bow by pulling outward.
3. First adjust the recline (see 3.3) to the required
position. Then push the car seat including the clamp
bow
towards the vehicles seat back until it is
•
positioned in the slot between the (vehicles) seat and
backrest cushions.
4. When the seat is fitted there should be no gap
between the top of the backrest and the vehicle seat
backrest, if a gap exists this will lead to instability,
rocking and possible damage to the seat mechanism.
5. Tighten the grub screws
on each side.
6. Depending on vehicle type the clamp bow can be
positioned to face upward or downward.
Removal advice:
1. To remove, pull the car seat forward including the
clamp bow and lift out of the car.
• Page 9 •
•
