hernest H200228 User Manual Download Page 10

Precautions & Maintenance

      

Use the product gently and slowly to last the durability.

       Clean the filter regularly.
       When the water flow gets obstructed after using for long time, please gentle clean the rubber tips on the shower to 

       get rid of the debris.

       Use soft liquid or glass detergent with soft water to rinse the filth on the surface.
       Avoid using any scrubbing detergent, polisher, sandpaper/cloth/scraper.
       Avoid using acid detergent, insoluble$grain-like detergent or soap.
       Turn of the water supply if the shower set won't be used for long.
       Keep the equipment warm when the ambient temperature below 0

/32F to avoid freezing.

10

13

14

Finishing the installation

Fix  the  shower  panel  with  the  hexagon 

wrench.

Hexagon wrench

For more detail information, please check out www.hernest.com
It will be our pleasure to have your visit.

After-Sale Service

If you have any issues with the product, please feel free to contact us online or by phone for customer service.
      Phone Number: (909) 430-1666

      Service E-mail: [email protected]
 

www.hernest.com

Summary of Contents for H200228











Reviews: