The recommended distance
is 55mm(2.2”)
3
Adjustable Wrench
Hexagon Wrench
Philips Screwdriver
Teflon Tape
Tools You will need
A
1
Fix the shower valve(A)into the wall, Use
a level to ensure that the valve is straight
and level. The distance between the
bottom of the body and the surface of
the tile is 55mm.
2
Wrap Teflon tape around the pipe
threads and connect hot and cold water
supply lines and in-wall pipes(not
included) as desired to the valve. Turn
on the water supply and open the
cartridge to check for leakage. Then, put
on the protective cover.
Installation Steps
Adjustable
Outlet1
Outlet2
Hot water inlet
Cold water inlet