Installation Instruction
Place the tub faucet set in the corresponding hole on the bathtub. Fix the faucet body to the pipe. And place the
base cover over the base.
Screw the pipe to the corresponding base
Install the flexible hose and ensure the flexible hoses are hand tightened in place. The flexible hoses are to be
fitted into the correct inlets for hot water and cold water. (DO NOT USE SPANNER TO TIGHTEN THE HOSES AS THE
O-RING CAN BE DAMAGED)
Connect another side of the flexible hose to the water supply pipe. Make sure they are to be fitted into the correct
outlets for hot water and cold water
Connect the shower hose and hand shower.
Finish.
②
③
①
3
TIPS
Red as hot water pipe, Blue as the cold water pipe
Clean the hot and cold water inlet pipes to prevent debris from entering the inside, damaging the valve body and
affecting the use.
10.1”
3.5”
1.3”
2.1”
2.1”
4.3”
3.6”
1.4”
Gravity ball
COLD
HOT