3
Installation Steps
3
Connect inlet hoses
①
with faucet body
and mixer water pipe
②
with spout.
Connect both inlet hoses to hot and cold
water supplies. Test after screwing tight
all connections.
1
2
please flush the water pipe for at least 2
minutes before installation to ensure
that no impurities interferes, and
supplies hot and cold water from angle
valve.
put faucet body and spout through
reserved holes, adjust direction of faucet
and spout. Install spout lock screw
③
and gasket
④
to faucet and screw tight.
Gasket a first, b second.
4
Try the product’s functionality and
finish.
Hot
COLD