background image

USER MANUAL

1

Caution

Please consu lt the professionals before installation or repairing. The company takes no liabilities for any damage or 

injuries that occur during the installation of the pipes, floor, wall and tub.

Thank you for shopping with Hernest, please read this user manual thoroughly for your full under

-

standing, installing, and application of the product. Please have this user manual well-reserved 

for future reference.

Before Installation

      

Check the package and ensure that all parts are included. If any part is missing or damaged, please contact us.

       Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving   

       the factory. 
       Shut off the main water supply before the installation.
       Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT). 
       Make sure to connect the hot/cold inlet pipe correctly. If standing in front, usually the hot water pipe connects to 
       the left and the cold water pipe to the right.
       Check for leaks and make sure every joint is safely sealed after the installation, 
       Turn on the water supply and flush the water pipes for 3 minutes to make sure it works well before putting it 

       into use.

SKU:H200016

  Single Hole Deck Mounted Faucet

Summary of Contents for H200016

Page 1: ...art is missing or damaged please contact us Do not disassemble the main body as it has been installed commissioned correctly precisely before leaving the factory Shut off the main water supply before the installation Do flush the water supply lines to remove any dirt and debris before installation IMPORTANT Make sure to connect the hot cold inlet pipe correctly If standing in front usually the hot ...

Page 2: ...er O ring Thread pipe Rubber cushion Big nut Water supply line Water supply line NOTES Make sure the installation holes are in the right size Install the lavatory faucet as per drawing Connect the main body and water supply pipe with the water inlet pipe ...

Page 3: ...t body and tighten it then tighten the thread pipe to the bottom of the faucet 5 Connect the inlet hose and the threaded pipe to the tap through the mounting hole adjust the direction of the tap Put the Gasket a is up b is down onto the threaded pipe and install the plastic nut on the thread tube by tightening it to keep the faucet fixed and avoid rotation 6 Connect the inlet hose to the angle valv...

Page 4: ...igher water temperature and lower the water temperature by operating reversely For more detail information please check out www hernest com It will be our pleasure to have your visit After Sale Service If you have any issues with the product please feel free to contact us online or by phone for customer service Phone No 909 430 1666 Service E mail service hernest com ...

Reviews: