Hermes VINYLE, User Manual

Page: 5 / 28

5
2. . SAFETY INFORMATION
1. Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9.
Respect the safety principale of the biased plug. A biased plug is equipped
with two pins, one larger than the other. If the provided pin is not adapted
to your electrical wall power socket, call an electrician to replace the
obsolete electrical wall power socket.
10.
Protect the power-supply cord from being stepped on or pinched, particulary
at plugs, convenience receptacles and the point where they exite from the
apparatus.
11.
Only use attachments / accessories specified bu the manufacturer.
12. Use the BOOM BOX only in its original base.
13.
Unplug this apparatus during lightning storms or when unused for long period
of time.
14.
Have all maintenance work done by qualified, specialized personnel. Repairs
are required when the device has been damaged : power cord or plug damaged
; liquid spilled on the device or if an object has fallen on it ; if it rains on the device or
if it is wet or damp ; if the device not normally operating ; or is the device has fallen.
15.
The equipment shall be used at a maximum of 45degrees C ambient temperature.
16.
To reduce the risk of electric shock, do not open the equipment. For safety reasons,
only allow qualified safety personnel to open the equipment.
17.
The mains plug or AC inlet is used as the disconnect means and shall remain readily
available