background image

4

Safety instructions 

Before starting up the device, please read the safety instructions carefully. If you have doubts 
about any function, we advise you to contact the seller. If the product was acquired through 
the 

miniVAP

®

 store, please contact miniVAP support. 

miniVAP

®

 is not responsible for damages caused by use of the device outside the 

recommendations and descriptions indicated in this manual. 

• The device must be 

used and stored in a dry location

, protected from 

  the elements.
• The device must be adequately ventilated to maintain correct 

cooling.

 

• The device must 

never

 be transported or stored when it is turned on. It should never be 

covered with materials that obstruct adequate ventilation. 

• 

Do not blow

 into the top or inhale from the bottom of the MiniVAP vaporizer.  Doing so 

can cause dirt to build up inside the unit and can damage the heater and/or battery.

• 

Never put 

anything 

into the

 vaporization chamber except those accessories designed 

for 

miniVAP

®

• 

The device and charging dock

 should be used on a flat, horizontal surface, away from 

humidity and heat sources. 

• 

Never put fingers inot the vaporization chamber when miniVAP

®

 is on

 for risk 

  of suffering burns. 
• 

Do not use the device

 while it is in the charging dock. 

• Do not leave the device on 

unattended or within reach of children.

 

• We suggest you read the 

recommendations on use of the battery.

 

Summary of Contents for miniVAP





















Reviews: