Z
© 2012 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
,
Z
, Embody, Co/Struc and Mirra are among the registered trademarks of Herman Miller, Inc.
TM
Sense, Setu, Tu and SAYL are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
10
Part no. 1b9vtc rev A.
36. Locate wire clip for tilt
tension knob. Slide flat blade
screwdriver under cable
collar. Pry up gently until
cable collar is free.
37. Grasp the cable and
push it forward to release
ball end from cylinder.
38. Hold the Knob assembly
using a flat blade screw driver.
Pull the tension knob using
other hand.
35. Lift up front of seat
assembly and remove.
