manualshive.com logo in svg

HermanMiller Prospect Media Space, Installation And Disassembly

Share
Download
HermanMiller Prospect Media Space Installation And Disassembly Download Page 3

HermanMiller

Assembly Instructions

3

1BJZTY rev B

Step 9

Step 8

Step 7

7.6 Spin Glides into feet.

9.1 Set Peninsula Assembly onto Cove Leg Assembly.  Top of Bag Hooks fi t 
into pockets in Peninsula Surface.

9.2 Secure surface to legs with M5 x 12 flathead socket screws.

7.1  Secure Spider to Column with hex socket button head screw.

7.2  Position Foot onto column.

7.3  Capture foot inside of column with Table Clamp. 

7.4 Secure clamp with M8 x 24 Flathead socket screw.  

7.5 Repeat process for other 3 feet.

8.1 Attach Peninsula Leg Assembly to surface assembly with M5 x 25 hex 
socket head cap screws.

M8 x 24 Flathead 

Hex Socket Screws

Hex Socket Button 

Head Screws

Foot

Table Clamp

Peninsula Assembly

Cove Leg Assembly

Spider

Glide

Glide

Glide

Glide

Column

Peninsula Leg 

Assembly

M5 x 25 Hex Socket 

Head Cap Screw

M5 x 12 Flathead 

Socket Screw

Summary of Contents for Prospect Media Space







Reviews:

No comments

Brands by name

Popular brands

Load more brands