Parts Included
Tools Required
HermanMiller
Mora
™
System Soffit Assembly Installation
and Disassembly for Recycling Instructions
How to assemble your Soffit Assembly
Power Driver
Level
Front Panel
Side Panel Support
Bracket (2)
Front Panel Support
Bracket (2)
Zero Side Mount (5)
Zero Side Mount
Screw (5)
Interlock Bracket
Cleat (2)
Teather
Bumper (5) #10-12 x 5/8 Pan
Head Screw (19)
#10-12 x 3/4 Pan
Head Screw (2)
#8-15 x 5/8 Flat
Head Screw (20)
#8-15 x 1 1/4 Pan
Head Screw (6)
Soffit Base
LH Side Panel
RH Side Panel
Phillips Bit
Stud Finder
Laser Level &
Tripod
Drill Bit
Tape Measure
Table Saw
Jig Saw
Pencil
Safety Glass
Note: Please refer to Mora System planning guide for different wall
constructions.
CH105. Toggle Bolts
Additional Product Needed - Sold Seperately
Ceiling
Storage Units
CH300. Overhead Storage
1.1 Measure from top of storage unit to ceiling.
Step 1
Measure
1.2 Mark that dimension on face of Front Panel and Side Panels .
1.3 Place tape over area to be cut to prevent chipout.
1.4 Mark cut line on tape. Cut panels with table saw or jig saw.
Measure
Measure
Measure
Tape
Cut Line
Top Edge
Top Edge
Top Edge
Cut Line
Cut Line
Tape
Tape
Face
Face
Face
Front Panel
Side Panel
Side Panel
HermanMiller for Healthcare
Assembly Instructions
1
1BKN3K rev B
