Parts Included
Additional Products Needed - Sold Seperately
Tools Required
HermanMiller
Mora
™
System Cantilever Installation and
Disassembly for Recycling Instructions.
How to assemble your Cantilever.
Wall Cabinet Bracket
CH646. Surface Wall Attachment Support (2)
Power Driver
Level
CH200 Series Wall Mounted Cabinet or
Work Surface
Toggle Bolt (4)
#10-12 x 5/8 Pan Head
Tapping Screw(4)
#8-32 x 1 Pan Head
Machine Screw(4)
Cantilever
Step 1
Phillips Bit
1/2” Drill Bit
1/8” Drill Bit
Safety Glass
1.1 Position top Wall Cabinet Bracket on back of Cantilever, flush with top
edge, vertically centered on cantilever.
1.2 Position other Wall Cabinet Bracket flush with back edge of Cantilever,
centered on horizontal center.
1.3 Mark holes.
1.4 Remove brackets. Drill 1/8” pilot holes 5/8” deep. Be careful not to drill
through cantilever.
1.5 Re-position brackets onto cantilever. Secure to cantilever with 4 #10 - 3/4”
pan head tapping screws provided with bracket.
Pan Head Tapping Screw
Pan Head Tapping Screw
Wall Cabinet Bracket
Back Edge
Mark Holes
Mark Holes
Mark Holes
Mark Holes
Wall Cabinet Bracket
Centerline of Cantilever
Centerline of Cantilever
Cantilever
HermanMiller for Healthcare
Assembly Instructions
1
1BLHZT rev B
